Honeywell International Inc. 99EXLF Manual De Usuario

13 - 4

The eBase enables you to charge an additional battery pack independently of the terminal well 
in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. This feature 
ensures that you can always have a fully charged battery for your terminal.

This USB port is USB v2.0 Hi-Speed compliant. Using a USB cable, you can connect the 
eBase to a USB compliant device to facilitate USB communication to and from the terminal. 
USB communication occurs through Microsoft ActiveSync (v4.5 or higher) or Microsoft 
Windows Mobile Device Center depending on the host workstation’s operating system. When 
the terminal is seated in the terminal well, it is connected to the peripheral device via the 
eBase.

Note:

ActiveSync on your Dolphin terminal works with Windows Mobile Device Center on host 
workstations running Windows Vista or Windows 7 and with ActiveSync on host workstations 
running Windows XP. For detailed information on ActiveSync and Windows Mobile Device 
Center visit

Use a standard CAT-5 Ethernet cable; you can connect the ebase to an Ethernet-compliant 
device to facilitate Ethernet communication to and from the terminal. 

Green

Flashing

Data transfer in progress.

Solid

A connection has been established between the Dolphin 
terminal and the Ethernet.

Yellow

Solid

Ethernet is connected at 100T.

Off

Ethernet is connected at 10T.

Auxiliary Battery Well

DC Power Jack

RJ45 Ethernet Port

USB Port

Green LED

Yellow LED