Honeywell International Inc. 99EXLF Manual De Usuario

13 - 8

Setting Up and Connecting the Dolphin Terminal to the eBase

1.

Verify the base has power. If the Power/Dock LED is not illuminated, see 

2.

Plug the USB communication cable into the USB port on the back of the eBase.

Note: The Dolphin terminal should always be removed from the eBase when connecting or disconnecting the 

USB cable.

3.

Connect the other end of the USB cable to the host workstation.

4.

Insert the Dolphin terminal in the eBase terminal well. The Power/Dock LED changes to green and 
the COMM LED illuminates red. 

5.

The Dolphin terminal activates and automatically opens ActiveSync to establish a connection.

6.

The connection icon in the Dolphin’s navigation bar changes from  

  to  

 it indicate a successful 

connection. The eBase can now transfer data between the terminal and the host device.

Set the eBase on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure 
to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal 
while it is in the eBase.

When choosing a location, bear in mind that: 

• the mounting location must allow users easy access to the Auxiliary Battery Well, and
• the Ethernet and USB ports as well as the power jack face straight out of the rear panel, and you will 

most likely want easy access to them in the future.

The DIN rail slot (7.5 X 35 mm) may be mounted on the bottom 
to allow for secure desk attachment of the unit if desired. 

• 3/16 in. dia x 5/8 in. long pan head screw
• 1/2 in. OD x 7/32 in. ID x 3/64 in. thick washer
• 3/16 in. dia nut

1.

Slide the DIN rail slot along the bottom panel. 

2.

Then, using the appropriate hardware, secure the DIN rail to the desk or flat surface. 

x

DIN Rail 
(7.5 X 35 mm)