Honeywell International Inc. CS19A Manual De Usuario

11 - 3

The device responds to serial commands with one of three responses:

Indicates a good command which has been processed.

Indicates an invalid Tag or SubTag command. 

Indicates the command was good, but the Data field entry was out of 
the allowable range for this Tag and SubTag combination, e.g., an 
entry for a minimum message length of 100 when the field will only 
accept 2 characters.

When responding, the device echoes back the command sequence with 
the status character inserted directly before each of the punctuation marks 
(the period, exclamation point, comma, or semicolon) in the command.

In the following examples, a bracketed notation [   ] depicts a non-displayable 
response.

What is the range of possible values for Codabar Coding Enable?

This response indicates that Codabar Coding Enable (CBRENA) has a range of 
values from 0 to 1 (off and on).  

What is the default value for Codabar Coding Enable?

This response indicates that the default setting for Codabar Coding Enable 
(CBRENA) is 1, or on.  

What is the device’s current setting for Codabar Coding Enable?

This response indicates that the device’s Codabar Coding Enable (CBRENA) is 
set to 1, or on.  

What are the device’s settings for all Codabar selections?

Preliminary Draft