Honeywell International Inc. CX85WCR Manual De Usuario
Using the Charge Rack
5-3
DIAD 6 Charge Rack Manual
Charging the Main Battery
The rack provides power to the DIAD 6 terminals and
allows the charging of the main batteries in the termi-
nal. The intelligent battery charging system incorpo-
rated into all DIAD 6 terminals prevents
overcharging, which means that DIAD 6 terminals
may be stored in the rack indefinitely without damage
to the terminals, battery packs, or the rack.
allows the charging of the main batteries in the termi-
nal. The intelligent battery charging system incorpo-
rated into all DIAD 6 terminals prevents
overcharging, which means that DIAD 6 terminals
may be stored in the rack indefinitely without damage
to the terminals, battery packs, or the rack.
The rack supports a reduced power output to each ter-
minal to allow simultaneous charging of all 30 units
across the full temperature specification. The termi-
nal will automatically reduce its power consumption
in the rack by turning off its display and backlight. To
communicate with the terminal, use the WLAN radio
for the Charge Rack. The application software should
turn off all other radios and features. If not, the oper-
ating temperature range may be reduced and/or the
power supply overloaded, which may result in an
extended charge time or no charging.
minal to allow simultaneous charging of all 30 units
across the full temperature specification. The termi-
nal will automatically reduce its power consumption
in the rack by turning off its display and backlight. To
communicate with the terminal, use the WLAN radio
for the Charge Rack. The application software should
turn off all other radios and features. If not, the oper-
ating temperature range may be reduced and/or the
power supply overloaded, which may result in an
extended charge time or no charging.
To Power a Terminal and Charge its Main Battery
1. Install the main battery pack in the terminal.
2. Slide the DIAD 6 terminal into one of the thirty terminal wells. The terminal screen turns off
immediately when docked to conserve power. Charging begins immediately if required by the
DIAD 6 terminal.
DIAD 6 terminal.
Charging Status Through Notification LEDs
The terminal will indicate the charging status through the notification LEDs at the top of the ter-
minal. The LEDs operate as follows:
minal. The LEDs operate as follows:
Solid Orange
Indicates that the terminal is docked in the rack and the battery is being
charged.
charged.
Solid Green
Indicates that the terminal is fully charged.
Solid Red
Indicates that the terminal is docked in the rack and receiving power,
but the battery appears to be worn out or defective.
but the battery appears to be worn out or defective.
Blinking Orange
Indicates that the terminal is docked and receiving power but is not
charging because the battery is too hot or too cold.
charging because the battery is too hot or too cold.
Off
Indicates that the terminal is not docked in the rack, the terminal is
defective, the rack is defective, or the rack is not receiving power.
defective, the rack is defective, or the rack is not receiving power.