Honeywell International Inc. SF61B-A Manual De Usuario
Chapter 2 — Connect the SF61B
SF61 Cordless Scanner User’s Guide
29
To test the Bluetooth communication
1
Open a data input application on the Intermec computer (
Start >
Text for example).
2
Read the following test code to make sure your connection is
working correctly:
working correctly:
Code 39 Test Bar Code
*123456*
*123456*
Disconnect the SF61B from an Intermec Computer
This procedure tells you how to disconnect your SF61B cordless
scanner from a recent Intermec computer running Windows CE.
scanner from a recent Intermec computer running Windows CE.
To remove the SF61B from the Intermec computer
1
Tap
Start > Settings > System > Wireless Scanning > Remove
Device > Remove.
The SF61B emits the “disconnect successful” beep sequence (series
of beeps from high to low) and the Intermec Ready-to-Work
indicator goes off.
of beeps from high to low) and the Intermec Ready-to-Work
indicator goes off.
2
Tap
Finish to exit the disconnect procedure.
Note: The following procedure is valid for recent Intermec computers.
If your Intermec computer has a different interface to the one
described here, the general principle will be the same.
If your Intermec computer has a different interface to the one
described here, the general principle will be the same.
Refer to the product-specific documentation for your Intermec
computer for full details on how to disconnect Bluetooth devices from
your product.
computer for full details on how to disconnect Bluetooth devices from
your product.