Honeywell International Inc. 4230A Manual De Usuario
Beeper and LED Sequences and Meaning
LED Indication
Beeper Indication
Cause
Normal Operation
Red Flash
Red Flash
None
Battery low
Green Flash
Successful communication
1 beep
or linking
Red, Blinking
3 beeps
Failed communication
Menu Operation
Green, Flash
Green, Flash
2 beeps
Successful menu change
Red, Blinking
3 beeps
Unsuccessful menu change
Repairs
Except for battery replacement, user repairs and/or upgrades are not to be
performed on this product. These services are to be performed only by an
authorized service center.
Maintenance
The IT4230 provides reliable and efficient operation with a minimum of care.
Although specific maintenance is not required, the following periodic checks
ensure dependable imager operation:
Cleaning the Imager’s Window
Reading performance may degrade if the imager’s window is not clean. If the window
is visibly dirty, or if the imager isn’t operating well, clean the window with a soft cloth
or lens tissue dampened with water (or a mild detergent- water solution). If a detergent
solution is used, rinse with a clean lens tissue dampened with water only.
The imager’s housing may also be cleaned the same way.
The imager’s housing may also be cleaned the same way.
Caution:
Do not submerge the imager in water. Do not use abrasive
wipes or tissues on the imager’s window – abrasive wipes may
scratch the window.
Never use solvents (e.g., acetone, benzene, ether, or phenol
based agents) on the housing or window – solvents may
damage the finish or the window.
10 IMAGETEAM
™
4230 Quick Start Guide