Honeywell International Inc. 9500LUP Manual De Usuario
Dolphin® 9500 Series Mobile Computer User’s Guide - Preliminary Rev (d) 12/17/04
7 - 37
I made changes, but they do not appear to
have taken effect.
have taken effect.
Always tap OK before exiting a screen you have changed. Then restart
the Client from the Client menu on the main screen.
the Client from the Client menu on the main screen.
How do I enable peer-to-peer (ad-hoc) mode
to have two clients communicate without an
access point?
to have two clients communicate without an
access point?
• On the Wireless Networks tab, add a new profile to the Configured
Network list.
• On the Profile Info tab, give each side the same network name (SSID).
• Select Peer-to-Peer Group (ad hoc mode) and Do active scan.
• On the WEP management section, select Use key for data encryption
• Select Peer-to-Peer Group (ad hoc mode) and Do active scan.
• On the WEP management section, select Use key for data encryption
and enter an identical key for both clients.
• Verify that this network profile is the first (or only) one in the
Configured Network list and try to restart both clients at roughly the
same time.
same time.
Advice and Workarounds
Issue
Possible Causes and Solutions