Honeywell International Inc. 9500LUPE Manual De Usuario

5. Place the SIM card door over the secured SIM card and fasten the screws.

6. Install the battery pack and turn on the terminal.

The back panel of the Dolphin 9500 contains both a speaker and a microphone that you can use to send and receive audio 
signals over the GSM network; see 

There are three audio modes:

Handset mode is when you use the use the back panel of the terminal just as you would a cell phone, 
holding the speaker to your ear to receive audio information and the your mouth over the microphone 
to send audio information. This is the default audio mode. 

Headset mode is when you plug a headset into the audio jack and speak into the microphone. You 
must use a 2.5mm plug; no other audio plug will fit.

Hands-free mode is when you use the back panel of the Dolphin 9500 as a speakerphone. To switch 
the back panel to speakerphone, in the Dialler, tap Settings > Speakerphone. The audio levels 
adjust appropriately for speakerphone use.

Use the Dolphin keyboard to manually adjust the volume.

To raise the volume, press the Blue modifier key + up arrow 

To lower the volume, press the Blue modifier key + down arrow 

Each keyboard option contains a key combination to send and end a call using the Red modifier key. 

Red + SP

Red + DEL

Red + D

Red + H

Red + 3

Red + 6

SIM Card Interface

Screws

SIM Card Door

SIM Card