Gemlink Ltd. JYC39BT Manual De Usuario
Problem
What to do
Soundbar does not respond
(no power).
(no power).
Check the mains power cable and make sure it is
plugged into a suitable power outlet.
plugged into a suitable power outlet.
No sound.
The Remote Control does not work.
No sound in Bluetooth mode.
Troubleshooting
5
Check that the mains power supply is switched on.
Connect the power to a different power outlet.
Check the Soundbar volume control is not at minimum.
Check that the Soundbar is not set to MUTE.
If you are connecting to the Soundbar using a
headphones port on your extemal audio device then
check the volume is turned up on that device.
headphones port on your extemal audio device then
check the volume is turned up on that device.
Replace the battery.
Make sure there are no obstacles obscuring the
Soundbar.
Make sure there are no obstacles obscuring the
Soundbar.
Check that the Soundbar is Paired with a Bluetooth
device. If prompted enter the code ‘0000’.
device. If prompted enter the code ‘0000’.
Power Supply
AC 120V, 60 HZ.
Power Source of Remote Control
DC 3V, 1 x CR2025 Battery (supplied)
Power Consumption
40W
Audio Power
Impedance
Technical Specification
6
Left Channel 20W
Right Channel 20W
Right Channel 20W
1 x Left Channel 20W 8Ω
1 x Right Channel 20W 8Ω
1 x Right Channel 20W 8Ω