Accton Technology 3CRWE454G72 Manual De Usuario
42
C
HAPTER
4: A
CCESS
P
OINT
C
ONFIGURATION
Figure 27 Encryption Keys Screen showing WPA configuration
To enter the pre-shared key as hexadecimal digits:
1 Select Enabled - Manual Pre-shared Key from the WPA Encryption Type
drop-down box.
2 Enter a pair of hexadecimal digits in each of the 32 Key fields. Each field
can contain a hexadecimal number from 00 to ff, for example 1a.
3 Click Apply to generate the key.
To enter the pre-shared key as a pass-phrase:
1 Select Enabled - Pre-Shared Passphrase from the WPA Encryption Type
drop-down box.
2 Enter a phrase of between 8 and 63 characters in length in the
Passphrase field. This passphrase will be used to generate a 256 bit key.
3 Click Apply to generate the key.
Configuring WEP
Encryption
There are two levels of WEP encryption available, 64 bit (sometimes
referred to as 40 bit) and 128 bit. 128 bit will result in a higher level of
security, but may cause a slight decrease in performance. Use the
Wireless Encryption Type box to select the desired level.
referred to as 40 bit) and 128 bit. 128 bit will result in a higher level of
security, but may cause a slight decrease in performance. Use the
Wireless Encryption Type box to select the desired level.