Accton Technology 3CRWE454G72 Manual De Usuario

The IEEE specification for wireless Ethernet which allows speeds of up to 
11 Mbps. The standard provides for 1, 2, 5.5 and 11 Mbps data rates. 
The rates will switch automatically depending on range and environment.

The IEEE specification for wireless Ethernet which allows speeds of up to 
54 Mbps. The standard provides for 6, 12, 24, 36, 48 and 54 Mbps data 
rates. The rates will switch automatically depending on range and 
environment.

The IEEE specification for 10 Mbps Ethernet over Category 3, 4 or 5 
twisted pair cable.

The IEEE specification for 100 Mbps Fast Ethernet over Category 5 
twisted-pair cable. 

An Access Point is a device through which wireless clients connect to 
other wireless clients and which acts as a bridge between wireless clients 
and a wired network, such as Ethernet. Wireless clients can be moved 
anywhere within the coverage area of the access point and still connect 
with each other. If connected to an Ethernet network, the access point 
monitors Ethernet traffic and forwards appropriate Ethernet messages to 
the wireless network, while also monitoring wireless client radio traffic 
and forwarding wireless client messages to the Ethernet LAN.

Ad Hoc mode is a configuration supported by most wireless clients. It is 
used to connect a peer to peer network together without the use of an 
access point. It offers lower performance than infra-structure mode, used 
by the Access Point. (see also Infra-structure mode.)

Some devices in the OfficeConnect range support auto-negotiation. 
Auto-negotiation is where two devices sharing a link, automatically