Braemar Manufacturing LLC FUSIONMCT Manual De Usuario
Fusion Wireless Recorder
13
F. Although the device detection algorithms are very sophisticated,
there is no guarantee that the device will catch all episodes of
arrhythmia.
arrhythmia.
Start the Recording and Check Connection to Server
The Recording screen should now be displayed. An icon in the
upper right corner indicates the type of connection that is being used
to transfer the information to the Fusion Server.
upper right corner indicates the type of connection that is being used
to transfer the information to the Fusion Server.
(not transmitting)
Cellular
Bluetooth modem
USB cable
A majority of the time the recorder will not be transmitting an so
there will only be the battery icon in the upper right corner.
there will only be the battery icon in the upper right corner.
Call the service center and verify the SN of the recorder has
contacted the Fusion Server. It is now the job of the service center
complete enrollment of the patient with the recorder.
contacted the Fusion Server. It is now the job of the service center
complete enrollment of the patient with the recorder.
Fusion Wireless Recorder
14
Patient Operating Instructions
Establishing the Home Link
In accordance with FDA directive, Fusion Wireless Monitoring with
patient alarm conditions requires the establishment of a Home Link
alternative to cellular data communications. The Fusion recorder kit
contains Bluetooth wireless hardware that must be connected to a normal
RJ-11C telephone jack. The jack used should typically be located on the
nightstand or near where the patient will spend most of their time during
the procedure. Patients inside the home location should be in Home Link
wireless contact if they are within approximately 75 feet of the system.
Note: This modem has an actual line of site range of 328 feet but due to
walls and other structural impedance the modem should be placed within
100 feet.
patient alarm conditions requires the establishment of a Home Link
alternative to cellular data communications. The Fusion recorder kit
contains Bluetooth wireless hardware that must be connected to a normal
RJ-11C telephone jack. The jack used should typically be located on the
nightstand or near where the patient will spend most of their time during
the procedure. Patients inside the home location should be in Home Link
wireless contact if they are within approximately 75 feet of the system.
Note: This modem has an actual line of site range of 328 feet but due to
walls and other structural impedance the modem should be placed within
100 feet.
The Fusion recorder and Home Link modem connections are preset at
the factory and do not need any user configuration.
the factory and do not need any user configuration.