Unitech Electronics Co. Ltd. PA600BTGGR Manual De Usuario
Chapter 3
Getting Connected
23
9. Click Finish.
You may be prompted to restart your computer.
After you have installed ActiveSync and restarted your computer, the ActiveSync icon
appears in your computer’s system tray as shown and ActiveSync Connection
Wizard starts. For detailed information on how to use ActiveSync on your computer,
start ActiveSync then click Help
start ActiveSync then click Help
→ Microsoft ActiveSync Help.
Connecting the Device to Your Computer
1. After ActiveSync has been installed, connect the USB charging cable to the uni-
versal connector on the bottom of your device. If necessary, connect an
adapter. Refer to Connecting the PA600 to a PC on page 10.
adapter. Refer to Connecting the PA600 to a PC on page 10.
2. Plug the other end of the USB charging cable into a USB port on your com-
puter.
3. Turn the device on.
4. ActiveSync starts automatically and configure the USB port to work with the
4. ActiveSync starts automatically and configure the USB port to work with the
PA600. The New Partnership setup wizard will automatically start.
NOTE:
If ActiveSync doesn’t start automatically, click Start
→ Programs →
Microsoft ActiveSync.
If a message appears indicating that it is unable to detect a connection,
click the Cancel button and manually configure the communication set-
tings.
If a message appears indicating that it is unable to detect a connection,
click the Cancel button and manually configure the communication set-
tings.
5. Follow the onscreen instructions.
6. When the configuration
6. When the configuration
process is complete, the
ActiveSync window
appears.
ActiveSync window
appears.
7. Synchronization will be initialized and will take place if you’ve chosen to syn-
chronize periodically or upon connection.
NOTE:
Your computer can create a partnership with multiple PA600s. Also, a
PA600 can create a partnership with up to two computers.
PA600 can create a partnership with up to two computers.