Unitech Electronics Co. Ltd. PA600BTGGR Manual De Usuario

Chapter 5

   

Advanced Settings

40

Copyright 2006 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.

The Power screen appears.

2. The battery menu item displays the status 

of the main and backup batteries. 
On the screen shown here, both batteries 
are Good.

NOTE:

It is necessary to charge the bat-
tery when the battery charge 
reaches below 10%. If the battery 
does not accept a charge, contact 
unitech Technical Support.

You can extend the PA600 battery life by doing either of the following:

•

Change the automatic power settings

•

Minimize the use of backlight

The PA600 will enter idle mode when there is no task, or all tasks are waiting for input. 
In default setting, the PA600 automatically turns itself off if it remains idle for 3 minutes 
and when there is no external charging power connected. Pressing the power button 
returns the PA600 to the same point at the time of automatic shutdown.
To change the automatic power settings:

1. In the Power screen tap the Advanced tag. 
2. Tap the automatic shut off time arrow to 

select from a list of time periods. The 
available time periods are 1, 2, 3, 4, and 5 
minutes.

3. This function can also be activated when 

the PA600 is plugged into the power 
adapter or placed in its docking station by 
tapping the On external power check 
box and then tapping the arrow to select 
from a list of time periods. The available 
time periods are 1, 2, 5, 10, 15, and 30 
minutes.