Acer BL503G External Photos
American Telecommunications Certification Body Inc.
6731 Whittier Ave, McLean, VA 22101
June 13, 2006
RE:
Acer, Inc
FCC ID:
HLZBL503G
I have a few comments on this Application. Depending on your responses, kindly understand there
may be additional comments.
may be additional comments.
1.) This device requires a Tune Up procedure. My apologies for this omission on my previous
review of this filing. Kindly be sure that RF power target values are included.
2.) The label for this device does not contain the information the required two-part compliance
statement 15.19(a)(3). I acknowledge that the statement exists within the Manual, however
FCC interpretations require that all devices larger than the palm of the hand require this
statement on the EUT itself. Please advise.
FCC interpretations require that all devices larger than the palm of the hand require this
statement on the EUT itself. Please advise.
3.) There are two other separately certified devices which are also affected by this Application.
They are FCC IDs: PD9WM3945ABG and QDS-BRCM1018. Kindly confirm if a Class II PC
has been performed on these other filings considering the EMI spurious emissions interaction
with HLZBL503G.
has been performed on these other filings considering the EMI spurious emissions interaction
with HLZBL503G.
4.) Your April 28 email states that SAR was performed for client reference only and should not be
considered for this RF category “Mobile” device. This is acceptable. However, this also implies
that the SAR references within the Manual are unsubstantiated. Kindly review the last page of
the Manual and remove all unsubstantiated claims for RF Exposure.
that the SAR references within the Manual are unsubstantiated. Kindly review the last page of
the Manual and remove all unsubstantiated claims for RF Exposure.
William H. Graff
President and Director of Engineering
mailto: whgraff@AmericanTCB.com
The items indicated above must be submitted before processing can continue on the above referenced
application. Failure to provide the requested information may result in application termination.
Correspondence should be considered part of the permanent submission and may be viewed from the
Internet after a Grant of Equipment Authorization is issued.
Please do not respond to this correspondence using the email reply button. In order for your response to be
processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also,
please note that partial responses increase processing time and should not be submitted.
Any questions about the content of this correspondence should be directed to the sender.
application. Failure to provide the requested information may result in application termination.
Correspondence should be considered part of the permanent submission and may be viewed from the
Internet after a Grant of Equipment Authorization is issued.
Please do not respond to this correspondence using the email reply button. In order for your response to be
processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also,
please note that partial responses increase processing time and should not be submitted.
Any questions about the content of this correspondence should be directed to the sender.