Acer n30 Manual De Usuario

7   U s i n g   e x p a n s i o n   f e a t u r e s
Using an USB thumb drive

62  

 

3

Push the card into the slot using your finger until you feel the card lock and hear an 
audible system sound. This indicates that the card is properly seated within the slot.

Removing an SD/MMC card

1

Hold your handheld securely. 

2

Release the card from the slot by using your thumb to push against the top of the 
card, as if you were pushing it further into the slot (a). An audible system sound and a 
click will signal that the card has been released. 

3

Gently remove the card from the slot (b).

Using an USB thumb drive

Your Acer n30 supports USB host expansion. Via 3-in-one sync cable, you can access a 
USB thumb drive directly on your n30.

Inserting an USB thumb drive

1

Get the 3-in-one sync cable, and attach its 26-pin connector to the handheld. 

2

Insert the USB thumb drive into USB host port of 3-in-one sync cable. 

Removing an USB thumb drive

1

Remove the USB thumb drive from USB host port of 3-in-one sync cable. 

2

You can keep 3-in-one sync cable attached to handheld, or remove it from handheld.