Robotron Pty Ltd WRG3P Manual De Usuario

- 11 -

The WiNRADiO G3 SERIES receiver control panel has some elements
similar to from conventional shortwave receivers, and many additional
features as well.

The quickest way to get started with this receiver is to check its operation on
local AM stations.

Using the keyboard, type in the frequency of one your local AM stations:
For example, for 774 kHz, type in 7 7 4 , then k for kHz, then press Enter.
The typed-in frequency will appear on the digital frequency display.  Then
select the AM mode by clicking on the AM button. At this point, you should
hear the station. You can adjust the volume using the two buttons next to
the small Volume display. (Note also the little slider between these two
buttons: you can drag it up and down to change the volume faster.)

Manual tuning can be done in several ways.  Let’s start with the tuning knob:
Place the mouse cursor to the upper half of the tuning knob, at which point
you will see the cursor change to a curved double ended arrow.  Hold down
the right or left mouse buttons to increase or decrease the frequency, and
the knob will rotate clockwise or anti-clockwise, respectively.  If you place
your cursor in the bottom half of the tuning knob, the direction of the rotation
will reverse.