Honeywell International Inc. RTH9580WF01 Manual De Usuario

 Changing system setup

Your heating system 

type

If you selected Hot Water or Steam on “Your system type,” select the 

specific heating system here.

Number of cooling 

stages

Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires 

you have connected: ‘Y’ wire only (1 stage) or ‘Y’ and ‘Y2’(refer to your 

check list in Step 6 on page 12.)

Number of heating 

stages

Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires 

you have connected:  W’ wire only (1 stage) or ‘W’ and  W2’ (refer to your 

check list in Step 6 on page 12.)

Your fan control

Select whether your thermostat (default) or heating system controls the fan.

Type of changeover 

valve

If you selected Heat Pump on “Your system type,“ select whether it uses a 

cooling changeover valve (default) or heating changeover valve. f you are 

unsure, note which wires you have connected: refer to your check list in 

Step 6 on page 14.

Number of heat 

pump compressor 

stages

Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires 

you have connected: ‘Y’ wire only (1 stage) or ‘Y’ and ‘Y2’(refer to your 

check list in Step 6 on page 14).

Your backup heat

No or Yes (default) you can determine whether you have backup heat by 

refering to your check list in Step 6 on page 14.