GTO Access Systems LLC GTOFM231 Manual De Usuario
Driveway Alarm
I N S T A L L A T I O N M A N U A L
Rev. 11/03/09 • Printed in China for GTO, Inc.
How it works:
The Transmitter - Sensor:
The operating voltage for the transmitter is 3V from two alkaline ‘AA Size’ batteries (not included) inside
the transmitter. In cold weather lithium-alkaline batteries will perform best. There is no power switch for
this unit. Once the batteries are installed, the unit starts to function.
The operating voltage for the transmitter is 3V from two alkaline ‘AA Size’ batteries (not included) inside
the transmitter. In cold weather lithium-alkaline batteries will perform best. There is no power switch for
this unit. Once the batteries are installed, the unit starts to function.
IMPORTANT: Batteries should be installed
at the mounting location to ensure proper calibration of the sensor. You should install the batteries at the location by removing the
transmitter cover and then replacing it.
transmitter cover and then replacing it.
The approximate transmitting range from the transmitter to the receiver is
400 ft. (at 433MHz). The range may vary depending on environmental conditions such as RF interference,
topography and construction of the building.
topography and construction of the building.
The Receiver:
The receiver is powered by an external power adaptor (AC120V 60Hz / DC 12V 100 mA). A rotary switch
controls the alert buzzer’s volume on the receiver. There are three LEDs on the front panel of the cabinet,
representing power (red), visitor alert (green) and low battery (red). A “RESET” button on the front panel is
used to clear the alert LED after it has registered passing vehicles.
The receiver is powered by an external power adaptor (AC120V 60Hz / DC 12V 100 mA). A rotary switch
controls the alert buzzer’s volume on the receiver. There are three LEDs on the front panel of the cabinet,
representing power (red), visitor alert (green) and low battery (red). A “RESET” button on the front panel is
used to clear the alert LED after it has registered passing vehicles.
Thank you for purchasing the Mighty Mule Driveway Alarm. Please read the directions carefully and
completely before installing.
For more information on Mighty Mule's full line of automatic gate openers and access controls visit our web site at www.mightymule.com
ACCESS CONTROLS
WIRELESS
Kit Includes:
• Transmitter Module
• Sensor
• Receiver
• Transformer
• Mounting post (3 pieces)
• Installation manual
• Sensor
• Receiver
• Transformer
• Mounting post (3 pieces)
• Installation manual
Sensor
Mounting
post
Receiver
Transformer
Transmitter