ZyXEL Communications Corporation 5VZ-A2011 Manual De Usuario
Chapter 1 Introducing the CellPipe 7130 RG
CellPipe 7130 RG User’s Guide
27
Refer to the Quick Start Guide for information on hardware connections.
Off
There is no Internet connection or the gateway is in
bridged mode.
bridged mode.
DSL
Green
On
The DSL line is up.
Blinking
The CellPipe 7130 RG is initializing the DSL line.
Off
The DSL line is down.
WPS
Green
On
The wireless connection is successful. The light turns on
for about 3 seconds before turning off.
for about 3 seconds before turning off.
Blinking
The CellPipe 7130 RG is connecting with other wireless
clients using WPS.
clients using WPS.
Off
The WPS feature is not activated or has an error.
WLAN
Green
On
The wireless network is activated and is operating in IEEE
802.11b/g mode.
802.11b/g mode.
Blinking
The CellPipe 7130 RG is communicating with other
wireless clients.
wireless clients.
Off
The wireless network is not activated.
HPNA
Green
On
The CellPipe 7130 RG is connected to an HPNA-equipped
device through the coaxial cable.
device through the coaxial cable.
Blinking
Data is transmitting over the HPNA cable.
Off
No HPNA device is connected.
USB
Green
On
The CellPipe 7130 RG recognizes a USB connection.
Blinking
The CellPipe 7130 RG is sending/receiving data to /from
the USB device connected to it.
the USB device connected to it.
Off
The CellPipe 7130 RG does not detect a USB connection.
GigE
Green
On
The Giga Ethernet connection is working.
Blinking
The CellPipe 7130 RG is sending or receiving data to/
from the Giga Ethernet link.
from the Giga Ethernet link.
Off
There is no Giga Ethernet link.
ETHERNET
1-4
1-4
Green
On
The CellPipe 7130 RG has a successful 100 Mbps
Ethernet connection with a device on the Local Area
Network (LAN).
Ethernet connection with a device on the Local Area
Network (LAN).
Blinking The CellPipe 7130 RG is sending or receiving data to/
from the LAN at 100 Mbps.
Off
The CellPipe 7130 RG does not have an Ethernet
connection with the LAN.
connection with the LAN.
Power
Green
On
The CellPipe 7130 RG is receiving power and ready for
use.
use.
Blinking
The CellPipe 7130 RG is self-testing.
Red
On
The CellPipe 7130 RG detected an error while self-
testing, or there is a device malfunction.
testing, or there is a device malfunction.
Off
The CellPipe 7130 RG is not receiving power.
Blinking
Firmware upgrade is in progress.
Table 1 LED Descriptions
LED
COLO
R
R
STATUS
DESCRIPTION