ZyXEL Communications Corporation 5VZ-A2011 Manual De Usuario
Chapter 25 Diagnostic
CellPipe 7130 RG User’s Guide
286
Maintenance
Association (MA)
Name
Association (MA)
Name
Type a name of up to 39 printable English keyboard characters for this
MA.
MA.
The combined length of the MD Name and MA name must be less or
equal to 44bytes.
equal to 44bytes.
Maintenance
Association (MA)
Format
Association (MA)
Format
Select the format which the CellPipe 7130 RG uses to send this MA
information in the domain (MD). Options are VID, String and
Integer.
information in the domain (MD). Options are VID, String and
Integer.
If you select VID or Integer, the CellPipe 7130 RG adds the VLAN ID
you specified for an MA in the CCM.
you specified for an MA in the CCM.
If you select String, the CellPipe 7130 RG adds the MA name you
specified above in the CCM.
specified above in the CCM.
Note: The MEPs in the same MA shoule use the same MA format.
Destination MAC
Address
Address
Enter the target device’s MAC address to which the CellPipe 7130 RG
performs a CFM loopback test.
performs a CFM loopback test.
Count
Set how many times the CellPipe 7130 RG send loopback messages
(LBMs).
(LBMs).
802.1Q VLAN ID
Type a VLAN ID (0-4095) for this MA.
Maintenance End
Point ID
Point ID
Enter an ID number (1-8191) for this MEP port. Each MEP port needs a
unique ID number within an MD. The MEP ID is to identify an MEP port
used when you perform a CFM action
unique ID number within an MD. The MEP ID is to identify an MEP port
used when you perform a CFM action
Status
Continuity Check
Message (CCM)
Continuity Check
Message (CCM)
This shows how many Connectivity Check Messages (CCMs) are sent
and if there is any invalid CCM or cross-connect CCM.
and if there is any invalid CCM or cross-connect CCM.
Loopback
Message (LBM)
Message (LBM)
This shows how many Loop Back Messages (LBMs) are sent and if
there is any inorder or outorder Loop Back Response (LBR) received
from a remote MEP.
there is any inorder or outorder Loop Back Response (LBR) received
from a remote MEP.
Linktrace
Message (LTM)
Message (LTM)
This shows the destination MAC address in the Link Trace Response
(LTR).
(LTR).
Save
Click this to save your changes back to the CellPipe 7130 RG.
Enable CCM
Click this button to have the selected MEP send Connectivity Check
Messages (CCMs) to other MEPs.
Messages (CCMs) to other MEPs.
Disable CCM
Click this button to disallow the selected MEP to send Connectivity
Check Messages (CCMs) to other MEPs.
Check Messages (CCMs) to other MEPs.
Update CC status Click this button to reload the test result.
Send Loopback
Send Loopback
Click this button to have the selected MEP send the LBM (Loop Back
Message) to a specified remote end point.
Message) to a specified remote end point.
Send Linktrace
Click this button to have the selected MEP send the LTMs (Link Trace
Messages) to a specified remote end point.
Messages) to a specified remote end point.
Table 98 Maintenance > Diagnostic > 802.1ag (continued)
LABEL
DESCRIPTION