ZyXEL Communications Corporation 5VZ-A2011 Manual De Usuario
Chapter 2 Tutorials
CellPipe 7130 RG User’s Guide
73
are only allowed to access the Doom server on Friday to Saturday, from 1PM to
8PM.
8PM.
Tutorial: NAT Port Forwarding Setup
Thomas may set up the port settings by configuring the port settings for the Doom
server computer (see
server computer (see
Section 8.3 on page 172
for more information).
1
Click Network > NAT to open the Port Forwarding screen. Enter the following
values:
values:
D=192.168.1.34
WAN
LAN
port 666
A
Service Name
Select User Defined.
In the screen that opens, enter Doom_Server as the Service
Name.
Name.
WAN Interface
Select the WAN interface through which the Doom service is
forwarded. This is the default interface for this example, which is
ipoe_eth4_1.
forwarded. This is the default interface for this example, which is
ipoe_eth4_1.
Server IP Address
Enter the IP address of the Doom server. This is 192.168.1.34
for this example.
for this example.
External Port/s
Enter 666 as the Start and End port.
Protocol
Select TCP/UDP. This should be the protocol supported by the
Doom server.
Doom server.
Start/Stop Time
Select Days
Enter 13:00 ~ 20:00 in the time fields and select Friday ~
Saturday in the day field.
Saturday in the day field.