ZyXEL Communications Corporation AG320 Manual De Usuario

ZyXEL AG-320 User’s Guide

54

Chapter 4 ZyXEL Utility Configuration

Preamble Type

Preamble is used to signal that data is coming to the receiver. Select the preamble 

type that the AP uses.
Short Preamble increases performance as less time sending preamble means 

more time for sending data. All IEEE 802.11b/g compliant wireless adapters 

support Long Preamble, but not all support short preamble. 
Select Auto to have the AG-320 automatically use short preamble when all access 

point or wireless stations support it; otherwise the AG-320 uses long preamble. 

Note: The AG-320 and the access point or wireless stations MUST 

use the same preamble mode in order to communicate.

Power Saving 

Mode

Select Enabled to save power (especially for notebook computers). This forces 

the AG-320 to go to sleep mode when it is not transmitting data.
When you select Disabled, the AG-320 will never go to sleep mode.

OTIST (One-

Touch Intelligent 

Security 

Technology)

Select this check box to enable OTIST.

Setup Key

Enter the same setup key (up to eight printable characters) as the ZyXEL AP or 

wireless router to which you want to associate. The default OTIST setup key is 

"01234567". 

Note: If you change the OTIST setup key on the ZyXEL AP or 

wireless router, you must also make the same change here.

Start

Click Start to encrypt the wireless security data using the setup key and have the 

ZyXEL AP or wireless router set your AG-320 to use the same wireless settings as 

the ZyXEL AP or wireless router. You must also activate and start OTIST on the 

ZyXEL AP or wireless router all within three minutes. See 

for more information.

Save

Click Save to save the changes back to the AG-320 and return to the Link Info 

screen.

Table 13   Adapter  (continued)