ZyXEL Communications Corporation EMG1302R10A Manual De Usuario
EMG1302-R10A User’s Guide
123
C
H A P T E R
1 5
Interface Group
15.1 Overview
By default, all LAN and WAN interfaces on the EMG1302-R10A are in the same group and can
communicate with each other. You can create multiple groups to have the EMG1302-R10A assign
the IP addresses in different domains to different groups. Each group acts as an independent
network on the EMG1302-R10A.
communicate with each other. You can create multiple groups to have the EMG1302-R10A assign
the IP addresses in different domains to different groups. Each group acts as an independent
network on the EMG1302-R10A.
15.2 The Interface Group Screen
You can manually add a LAN interface or a VLAN ID to a new group. Click Configuration >
Network > Interface Group to open the following screen.
Network > Interface Group to open the following screen.
Figure 69
Configuration > Network > Interface Group
The following table describes the fields in this screen.
Table 50
Configuration > Network > Interface Group
LABEL
DESCRIPTION
Add
Click this to add a new interface grouping rule.
You must configure a WAN connection before you can add a new interface grouping
rule. See
rule. See
for more information.
Interface Grouping Rules
Name
This shows the descriptive name of the group.
LAN Interfaces
This shows the LAN interfaces in the group.
WAN Interfaces
This shows the WAN interfaces in the group.
Modify
Select the Delete icon to delete the group from the EMG1302-R10A.