ZyXEL Communications Corporation EMG1302R10A Manual De Usuario

Chapter 18 IPv6 Firewall

EMG1302-R10A User’s Guide

Add Firewall Rule

Service Name

Enter a name that identifies or describes the firewall rule.

MAC Address

Enter the MAC address of the computer for which the firewall rule applies.

Dest IP Address

Enter the IP address of the computer to which traffic for the application or service is 
entering.

The EMG1302-R10A applies the firewall rule to traffic initiations from this computer.

Source IP Address

Enter the IP address of the computer that initializes traffic for the application or service.

The EMG1302-R10A applies the firewall rule to traffic initiating from this computer.

Protocol

Select the protocol (TCP, UDP or ICMP) used to transport the packets for which you 
want to apply the firewall rule.

Dest Port Range

Enter the port number/range of the destination that define the traffic type, for example 
TCP port 80 defines web traffic.

Source Port Range

Enter the port number/range of the source that define the traffic type, for example TCP 
port 80 defines web traffic.

Add Rule

Click to add rule.

Firewall Rule

#

This is your firewall rule number. The ordering of your rules is important as rules are 
applied in turn.

ServiceName

This is a name that identifies or describes the firewall rule.

MACaddress

This is the MAC address of the computer for which the firewall rule applies.

DestIP

This is the IP address of the computer to which traffic for the application or service is 
entering.

SourceIP

This is the IP address of the computer to which traffic for the application or service is 
initialized.

Protocol

This is the protocol (TCP, UDP or ICMP) used to transport the packets for which you 
want to apply the firewall rule.

DestPortRange

This is the port number/range of the destination that define the traffic type, for 
example TCP port 80 defines web traffic.

SourcePortRange

This is the port number/range of the source that define the traffic type, for example 
TCP port 80 defines web traffic.

Action

DROP - Traffic matching the conditions of the firewall rule are stopped.

Delete

Click Delete to remove the firewall rule.

Reset

Configuration > Security > IPv6 Firewall (continued)