ZyXEL Communications Corporation EMG1302R10A Manual De Usuario

 Chapter 21 Maintenance

EMG1302-R10A User’s Guide

Find firmware at 

www.zyxel.com

 in a file that (usually) uses the system model name with a “*.bin” 

extension, e.g., “EMG1302-R10A.bin”. The upload process uses HTTP (Hypertext Transfer Protocol) 
and may take up to two minutes. After a successful upload, the system will reboot.

New Date

(yyyy/mm/

dd)

This field displays the last updated date from the time server or the last date configured 
manually.

When you select Manual, enter the new date in this field and then click Apply.

Get from Time 
Server

Select this radio button to have the EMG1302-R10A get the time and date from the time 
server you specified below.

User Defined 
Time Server 
Address 

Select User Defined Time Server Address and enter the IP address or URL (up to 20 
extended ASCII characters in length) of your time server. Check with your ISP/network 
administrator if you are unsure of this information.

Time Zone Setup

Time Zone

Choose the time zone of your location. This will set the time difference between your time 
zone and Greenwich Mean Time (GMT). 

Daylight 
Savings

Daylight saving is a period from late spring to early fall when many countries set their clocks 
ahead of normal local time by one hour to give more daytime light in the evening.

Select this option if you use Daylight Saving Time.

Start Date

Configure the day and time when Daylight Saving Time starts if you selected Daylight 
Savings. The o’clock field uses the 24 hour format. Here are a couple of examples.

Daylight Saving Time starts in most parts of the United States on the first Sunday of April. 
Each time zone in the United States starts using Daylight Saving Time at 2 A.M local time. 
So in the United States you would select First, Sunday, April and type 2 in the o’clock 
field.

Daylight Saving Time starts in the European Union on the last Sunday of March. All of the 
time zones in the European Union start using Daylight Saving Time at the same moment (1 
A.m. GMT or UTC). So in the European Union you would select Last, Sunday, March. The 
time you type in the o’clock field depends on your time zone. In Germany for instance, you 
would type 2 because Germany’s time zone is one hour ahead of GMT or UTC (GMT+1).

End Date

Configure the day and time when Daylight Saving Time ends if you selected Daylight 
Savings. The o’clock field uses the 24 hour format. Here are a couple of examples.

Daylight Saving Time ends in the United States on the last Sunday of October. Each time 
zone in the United States stops using Daylight Saving Time at 2 A.M. local time. So in the 
United States you would select Last, Sunday, October and type 2 in the o’clock field.

Daylight Saving Time ends in the European Union on the last Sunday of October. All of the 
time zones in the European Union stop using Daylight Saving Time at the same moment (1 
A.M. GMT or UTC). So in the European Union you would select Last, Sunday, October. The 
time you type in the o’clock field depends on your time zone. In Germany for instance, you 
would type 2 because Germany’s time zone is one hour ahead of GMT or UTC (GMT + 1).

Apply

Click Apply to save your changes back to the EMG1302-R10A.

Cancel

Click Cancel to exit this screen without saving.

Maintenance > Time (continued)