ZyXEL Communications Corporation EMG1302R10A Manual De Usuario
Chapter 6 Tutorials
EMG1302-R10A User’s Guide
50
For example, you may set up three wireless networks (A, B and C) in your office. A is for workers,
B is for guests and C is specific to a VoIP device in the meeting room.
B is for guests and C is specific to a VoIP device in the meeting room.
6.4.1 Configuring Security Settings of Multiple SSIDs
This example shows you how to configure the SSIDs with the following parameters on your
EMG1302-R10A.
EMG1302-R10A.
1
Connect your computer to the LAN port of the EMG1302-R10A using an Ethernet cable.
2
The default IP address of the EMG1302-R10A in router mode is “192.168.1.1”. In this case, your
computer must have an IP address in the range between “192.168.1.2” and “192.168.1.254”.
computer must have an IP address in the range between “192.168.1.2” and “192.168.1.254”.
3
Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to
show your computer’s IP address. If your computer’s IP address is not in the correct range then see
show your computer’s IP address. If your computer’s IP address is not in the correct range then see
Appendix C on page 251
for information on changing your computer’s IP address.
4
After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type “http://192.168.1.1” as the web address in your web browser.
type “http://192.168.1.1” as the web address in your web browser.
5
Enter “1234” (default) as the password and click Login.
6
Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.
A
B
C
SSID_Guest
SSID_Worker
SSID_VoIP
SSID
SECURITY TYPE
KEY
MAC FILTERING
SSID_Worker
WPA2-PSK
WPA Compatible
DoNotStealMyWirelessNetwork
Disable
SSID_VoIP
WPA-PSK
VoIPOnly12345678
Allow
00:A0:C5:01:23:45
SSID_Guest
WPA-PSK
keyexample123
Disable