ZyXEL Communications Corporation G270S Manual De Usuario

ZyXEL G-270S User’s Guide

32

Chapter 2 Wireless LAN Network

Note: You must click Start in the AP OTIST web configurator screen and Save in the 

wireless client(s) Adapter screen all within three minutes (at the time of 
writing). You can start OTIST in the wireless clients and AP in any order but 
they must all be within range and have OTIST enabled.    

1 If you enabled OTIST in the wireless client, you see this screen each time you start the 

ZyXEL utility. Click Yes for it to search for an OTIST-enabled AP.

2 If an OTIST-enabled wireless client loses its wireless connection for more than ten 

seconds, it will search for an OTIST-enabled AP for up to one minute. (If you manually 
have the wireless client search for an OTIST-enabled AP, there is no timeout; click 
Cancel in the OTIST progress screen to stop the search.)

1 In the AP, a web configurator screen pops 

up showing you the security settings to 
transfer. After reviewing the settings, click 
OK.

2 This screen appears while OTIST settings are being transferred. It closes when the 

transfer is complete. 

• In the wireless client, you see this screen if 

it can't find an OTIST-enabled AP (with the 
same Setup key). Click OK to go back to 
the ZyXEL utility main screen.

• If there is more than one OTIST-enabled AP within range, you see a screen asking you to 

select one AP to get settings from.