ZyXEL Communications Corporation G570SV2 Manual De Usuario
Chapter 7 Wireless Screens
ZyXEL G-570S
v2 User’s Guide
65
The following table describes the labels in this screen.
7.6.4 Bridge Mode
The device can act as a wireless network bridge and establish wireless links with other APs.
You need to know the MAC address of the peer device, which also must be in bridge mode.
You need to know the MAC address of the peer device, which also must be in bridge mode.
When two devices connect in Bridge mode, they form a WDS (Wireless Distribution System)
allowing the computers in one LAN to connect to the computers in another LAN. See the
following example.
allowing the computers in one LAN to connect to the computers in another LAN. See the
following example.
"
WPA, WPA2 and IEEE 802.1x wireless security are not available when you
use Wireless Client, Bridge or AP+Repeater mode.
use Wireless Client, Bridge or AP+Repeater mode.
"
You can use only WEP or WPA2-PSK keys to encrypt traffic between APs.
Table 16 Wireless: the AP Survey Screen
LABEL
DESCRIPTION
Site Survey
SSID
This field displays the SSID (Service Set IDentifier) of each access point.
BSSID
This field displays the MAC address of each access point.
Channel
This field displays the channel number used by each access point.
Wireless Mode
This field displays the wireless networking standard the access point is using.
Security
This field displays details of the access point’s security and data encryption
settings.
settings.
Signal Strength
This field displays the signal strength of each access point.
Rescan
Click Rescan to have the ZyXEL Device search again for available access
points.
points.