ZyXEL Communications Corporation IX280P Manual De Usuario
Chapter 2 Introducing the Web Configurator
MAX-207HW2R User’s Guide
27
The following table describes the labels in this screen.
Note: For security reasons, the MAX-207HW2R automatically logs you out if you do
not use the web configurator for five minutes. If this happens, simply log in
again.
again.
Table 4 Main
LABEL
DESCRIPTION
Logout
Click to log out of the Web Configurator.
Note: This does not log you off the WiMAX network, it simply
logs you out of the MAX-207HW2R’s browser-based
configuration interface.
configuration interface.
WiMAX Connection
Status
Status
This field indicates the current status of your WiMAX connection.
Status messages are as follows:
• Connected - Indicates that the MAX-207HW2R is connected
to the WiMAX network. Use the Strength Indicator icon to
determine the quality of your network connection.
• Disconnected - Indicates that the MAX-207HW2R is not
connected to the WiMAX network.
• DL_SYN - Indicates a download synchronization is in
progress. This means the firmware is checking with the
server for any updates or settings alterations.
Software Version
This field indicates the version number of the MAX-207HW2R’s
firmware. The version number takes the form of: Version
(Build),release status (candidate) | Version Release Date.
firmware. The version number takes the form of: Version
(Build),release status (candidate) | Version Release Date.
For example: V3.60(BCC.0)c4 | 07/08/2008 indicates that the
firmware is 3.60, build BCC.0, candidate4, released on July 08,
2008.
firmware is 3.60, build BCC.0, candidate4, released on July 08,
2008.
WiMAX Firmware
Version
Version
This field displays the version number of the chip firmware used
in this MAX-207HW2R.
in this MAX-207HW2R.
Version Date
This field indicates the exact date and time the current firmware
was compiled.
was compiled.
System Uptime
This field indicates how long the MAX-207HW2R has been on.
This resets every time you shut the device down or restart it.
This resets every time you shut the device down or restart it.