ZyXEL Communications Corporation IX280P Manual De Usuario
Chapter 6 The WIFI Configuration Screen
MAX-207HW2R User’s Guide
59
6.1.3 Before You Start
Before you start using these screens, ask yourself the following questions. See
Section 6.1.2 on page 56
if some of the terms used here do not make sense to
you.
• What wireless standards do the other wireless devices support (IEEE 802.11g,
for example)? What is the most appropriate standard to use?
• What security options do the other wireless devices support (WPA-PSK, for
example)? What is the best one to use?
• Do the other wireless devices support WPS (Wi-Fi Protected Setup)? If so, you
can set up a well-secured network very easily.
Even if some of your devices support WPS and some do not, you can use WPS to
Even if some of your devices support WPS and some do not, you can use WPS to
set up your network and then add the non-WPS devices manually, although this
is somewhat more complicated to do.
6.2 General Screen
Note: If you are configuring the MAX-207HW2R from a computer connected to the
wireless LAN and you change the MAX-207HW2R’s SSID or security settings,
you will lose your wireless connection when you press Apply to confirm. You
must then change the wireless settings of your computer to match the MAX-
207HW2R’s new settings.
you will lose your wireless connection when you press Apply to confirm. You
must then change the wireless settings of your computer to match the MAX-
207HW2R’s new settings.
Click Advanced > WIFI Configuration to open the General screen.
Figure 17 Advanced > WIFI Configuration > General