ZyXEL Communications Corporation IX280P Manual De Usuario

 Chapter 6 The WIFI Configuration Screen

MAX-207HW2R User’s Guide

Use this screen to set up a WPS wireless network using either Push Button 
Configuration (PBC) or PIN Configuration.

Click ADVANCED > WIFI Configuration > WPS. The following screen displays.

Figure 23   ADVANCED > WIFI Configuration > WPS

The following table describes the labels in this screen.

Apply

Click Apply to save your changes back to the MAX-207HW2R.

Reset 

Click to restore your previously saved settings.

Table 19   Advanced > WIFI Configuration > MAC Filter

Table 20   Network > Wireless LAN > WPS Station

Add Station by WPS
Push Button

Click this to add another WPS-enabled wireless device (within wireless 
range of the MAX-207HW2R) to your wireless network. This button may 
either be a physical button on the outside of device, or a menu button 
similar to the Push Button on this screen.

Note: You must press the other wireless device’s WPS button within 

two minutes of pressing this button.

Or input 
station's PIN 
number

Enter the PIN of the device that you are setting up a WPS connection 
with and click Start to authenticate and add the wireless device to your 
wireless network.

You can find the PIN either on the outside of the device, or by checking 
the device’s settings.

Note: You must also activate WPS on that device within two minutes 

to have it present its PIN to the MAX-207HW2R.