ZyXEL Communications Corporation NBG4104 Manual De Usuario

Chapter 23 Maintenance

NBG4104 User’s Guide

The following table describes the labels in this screen.

It is strongly recommended that you change your NBG4104's password. 

If you forget your NBG4104's password (or IP address), you will need to reset the device. See 

 for details.

Click Maintenance > Password. The screen appears as shown.

Maintenance > Password 

The following table describes the labels in this screen.

Maintenance > General

System Name

System Name is a unique name to identify the NBG4104 in an Ethernet network.

Domain Name

Enter the domain name you want to give to the NBG4104.

Administrator 
Inactivity Timer

Type how many minutes a management session can be left idle before the session times 
out. The default is 5 minutes. After it times out you have to log in with your password again. 
Very long idle timeouts may have security risks. A value of "0" means a management 
session never times out, no matter how long it has been left idle (not recommended).

Apply

Click Apply to save your changes back to the NBG4104.

Reset

Click Reset to begin configuring this screen afresh.

Maintenance > Password

Old Password

Type the default password or the existing password you use to access the system in this 
field.

New Password

Type your new system password (up to 30 characters). Note that as you type a password, 
the screen displays an asterisk (*) for each character you type.

Retype to 
Confirm

Type the new password again in this field.

Apply

Click Apply to save your changes back to the NBG4104.

Reset

Click Reset to begin configuring this screen afresh.