ZyXEL Communications Corporation NBG4104 Manual De Usuario
Appendix A Product Specifications
NBG4104 User’s Guide
161
24.7 Wall-mounting Instructions
Complete the following steps to hang your NBG4104 on a wall.
1
Select a position free of obstructions on a sturdy wall.
2
Drill two holes for the screws.
Be careful to avoid damaging pipes or cables located inside the wall
when drilling holes for the screws.
when drilling holes for the screws.
3
Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm between the
heads of the screws and the wall.
heads of the screws and the wall.
4
Make sure the screws are snugly fastened to the wall. They need to hold the weight of the NBG4104
with the connection cables.
with the connection cables.
5
Align the holes on the back of the NBG4104 with the screws on the wall. Hang the NBG4104 on the
screws.
screws.
Figure 93
Wall-mounting Example
The following are dimensions of an M4 tap screw and masonry plug used for wall mounting. All
measurements are in millimeters (mm).
measurements are in millimeters (mm).
Figure 94
Masonry Plug and M4 Tap Screw