ZyXEL Communications Corporation NBG4104 Manual De Usuario
Chapter 9 Wireless LAN
NBG4104 User’s Guide
66
The following table describes the labels in this screen.
9.10 WPS Station Screen
Use this screen when you want to add a wireless station using WPS. To open this screen, click
Configuration > Networking > Wireless LAN > WPS Station tab.
Configuration > Networking > Wireless LAN > WPS Station tab.
Note: After you click Push Button on this screen, you have to press a similar button in
the wireless station utility within 2 minutes. To add the second wireless station, you
have to press these buttons on both device and the wireless station again after the
first 2 minutes.
Figure 28
Configuration > Wireless LAN > WPS Station
Table 22
Configuration > Networking > Wireless LAN > WPS
LABEL
DESCRIPTION
Enable WPS
Select this to enable the WPS feature.
PIN Number
This displays a PIN number last time system generated. Click Generate to generate a
new PIN number.
new PIN number.
Status
This displays Configured when the NBG4104 has connected to a wireless network
using WPS or when Enable WPS is selected and wireless or wireless security settings
have been changed. The current wireless and wireless security settings also appear in
the screen.
using WPS or when Enable WPS is selected and wireless or wireless security settings
have been changed. The current wireless and wireless security settings also appear in
the screen.
This displays Unconfigured if WPS is disabled and there are no wireless or wireless
security changes on the NBG4104 or you click Release_Configuration to remove the
configured wireless and wireless security settings.
security changes on the NBG4104 or you click Release_Configuration to remove the
configured wireless and wireless security settings.
Release
Configuration
Configuration
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security settings for
WPS connections on the NBG4104.
WPS connections on the NBG4104.
802.11 Mode
This is the 802.11 mode used. Only compliant WLAN devices can associate with the
NBG4104.
NBG4104.
SSID
This is the name of the wireless network (the NBG4104’s first SSID).
Security
This is the type of wireless security employed by the network.
Apply
Click Apply to save your changes back to the NBG4104.
Reset
Click Reset to reload the previous configuration for this screen.