ZyXEL Communications Corporation NBG4104 Manual De Usuario

Chapter 10 WAN

NBG4104 User’s Guide

the same subnet, such as 10.0.0.3, the NBG4104 switches to use 192.168.1.1 as its LAN IP 
address.

Auto-IP-Change 

Auto-IP-Change only works under the following conditions:

• The NBG4104 must be in Router Mode (see 

 for more information) for 

Auto-IP-Change to become active. 

• The NBG4104 is set to receive a dynamic WAN IP address using the Ethernet or PPPoE connection 

type.

Use this screen to view, change, or add your NBG4104’s Internet access settings. Click 
Configuration > Networking > WAN. The following screen opens.

Configuration > Networking > Management WAN

The following table describes the labels in this screen.

Configuration > Networking > Management WAN

Add New WAN Entry Click this to create a new WAN interface entry.

#

This is the index number of the connection. 

Default

Select the WAN interface that you want to configure as default.

Name

This is the service name of the connection.

Interface

This is the interface of the connection.