ZyXEL Communications Corporation NBG417N Manual De Usuario
Chapter 8 WAN
User
’s Guide
114
Allow between LAN
and WAN
and WAN
Select this check box to forward NetBIOS packets from the LAN to
the WAN and from the WAN to the LAN. If your firewall is enabled
the WAN and from the WAN to the LAN. If your firewall is enabled
with the default policy set to block WAN to LAN traffic, you also
need to enable the default WAN to LAN firewall rule that forwards
NetBIOS traffic.
need to enable the default WAN to LAN firewall rule that forwards
NetBIOS traffic.
Clear this check box to block all NetBIOS packets going from the
LAN to the WAN and from the WAN to the LAN.
Allow Trigger Dial
Select this option to allow NetBIOS packets to initiate calls.
Auto-bridge
Enable Auto-bridge
mode
Enable Auto-bridge
mode
Select this option to have the NBG4115 switch to bridge mode
automatically when the NBG4115 gets a WAN IP address in the
range of 192.168.x.y (where x and y are from zero to nine) no
matter what the LAN IP address is.
automatically when the NBG4115 gets a WAN IP address in the
range of 192.168.x.y (where x and y are from zero to nine) no
matter what the LAN IP address is.
Apply
Click Apply to save your changes back to the NBG4115.
Reset
Click Reset to begin configuring this screen afresh.
Table 40 WAN > Advanced
LABEL
DESCRIPTION
om
pan
y
on
fiden
tial