ZyXEL Communications Corporation NBG418NV2 Manual De Usuario
Chapter 3 Connection Wizard
23
3.2.2 Domain Name
The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave this
blank, the domain name obtained by DHCP from the ISP is used. While you must enter the host
name (System Name) on each individual computer, the domain name can be assigned from the
NBG-418N via DHCP.
blank, the domain name obtained by DHCP from the ISP is used. While you must enter the host
name (System Name) on each individual computer, the domain name can be assigned from the
NBG-418N via DHCP.
Click Next to configure the NBG-418N for Internet access.
Figure 9
Wizard Step 1: System Information
The following table describes the labels in this screen.
3.3 Connection Wizard: STEP 2: Wireless LAN
Set up your wireless LAN using the following screen.
Table 3
Wizard Step 1: System Information
LABEL
DESCRIPTION
System Name
System Name is a unique name to identify the NBG-418N in an Ethernet network. Enter a
descriptive name. This name can be up to 30 alphanumeric characters long. Spaces are not
allowed, but dashes "-" and underscores "_" are accepted.
descriptive name. This name can be up to 30 alphanumeric characters long. Spaces are not
allowed, but dashes "-" and underscores "_" are accepted.
Domain Name
Type the domain name (if you know it) here. If you leave this field blank, the ISP may
assign a domain name via DHCP. The domain name entered by you is given priority over the
ISP assigned domain name.
assign a domain name via DHCP. The domain name entered by you is given priority over the
ISP assigned domain name.
Back
Click Back to display the previous screen.
Next
Click Next to proceed to the next screen.
Exit
Click Exit to close the wizard screen without saving.