ZyXEL Communications Corporation NBG418NV2 Manual De Usuario

Chapter 4 Modes

• Universal Repeater: In this mode, the NBG-418N (N) can be an access point and a wireless 

client at the same time. Use this mode if there is an existing wireless router or access point in 
your network and you want the NBG-418N (N) to wirelessly relay communications from its 
wireless clients to the access point.

Universal Repeater 

• Client Bridge: Use this mode if there is an existing wireless router or access point (AP) in the 

network to which you want to connect your NBG-418N (N) wirelessly. You should know the SSID 
and wireless security details of the wireless router or access point to which you want to connect.

Client Bridge

The NBG-418N is set to wireless router mode by default. If it was changed and now you want to set 
it back, do the following procedure.

Connect your computer to the LAN port of the NBG-418N. 

The default LAN IP address of the NBG-418N is 192.168.1.1 in router mode (192.168.1.2 by default 
in non-router mode). In router mode, the NBG-418N can assign your computer an IP address, so 
you must set your computer to get an IP address automatically (computer factory default) or give it 
a fixed IP address in the range between 192.168.1.3 and 192.168.1.254.

After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and 
type the IP address of the NBG-418N as the web address in your web browser.

Log into the Web Configurator. See the 

 for instructions on how to do this.