ZyXEL Communications Corporation NBG6616 Manual De Usuario

 Chapter 16 Static Route

NBG6616 User’s Guide

Network > Static Route

The following table describes the labels in this screen. 

Click the Add Static Route button or a rule’s Edit icon in the Static Route screen. Use this screen 
to configure the required information for a static route. 

Network > Static Route: Add/Edit 

Network > Static Route

Add Static Route

Click this to create a new rule.

#

This is the number of an individual static route.

Status

This field indicates whether the rule is active (yellow bulb) or not (gray bulb).

Name

This field displays a name to identify this rule.

Destination

This parameter specifies the IP network address of the final destination. Routing is always 
based on network number. 

Gateway

This is the IP address of the gateway. The gateway is a router or switch on the same 
network segment as the device's LAN or WAN port. The gateway helps forward packets to 
their destinations.

Subnet Mask

This parameter specifies the IP network subnet mask of the final destination.

Modify

Click the Edit icon to open a screen where you can modify an existing rule. 

Click the Delete icon to remove a rule from the NBG6616.

Apply

Click Apply to save your changes back to the NBG6616.

Cancel

Click Cancel to begin configuring this screen afresh.