ZyXEL Communications Corporation NBG6616 Manual De Usuario
Chapter 21 Bandwidth Management
NBG6616 User’s Guide
150
The following table describes the labels in this screen.
21.5.1 Rule Configuration: Application Rule Configuration
If you want to edit a bandwidth management rule for a pre-defined service or application, click the
Edit icon in the Application List table of the Advanced screen. The following screen displays.
Edit icon in the Application List table of the Advanced screen. The following screen displays.
Table 65
Management > Bandwidth Management > Advanced
LABEL
DESCRIPTION
Management Bandwidth
Upstream
Bandwidth
Bandwidth
Specify the total amount of bandwidth that you want to dedicate to uplink traffic. The
recommendation is to set this to match the actual upstream data rate.
recommendation is to set this to match the actual upstream data rate.
This is traffic from LAN/WLAN to WAN.
Downstream
Bandwidth
Bandwidth
Specify the total amount of bandwidth that you want to dedicate to downlink traffic. The
recommendation is to set this to match the actual downstream data rate.
recommendation is to set this to match the actual downstream data rate.
This is traffic from WAN to LAN/WLAN.
Application List
Use this table to allocate specific amounts of bandwidth based on a pre-defined service.
#
This is the number of an individual bandwidth management rule.
Priority
Select a priority from the drop down list box. Choose High, Mid or Low.
•
High - Select this for voice traffic or video that is especially sensitive to jitter (jitter is
the variations in delay).
•
Mid - Select this for "excellent effort" or better than best effort and would include
important business traffic that can tolerate some delay.
•
Low - Select this for non-critical "background" traffic such as bulk transfers that are
allowed but that should not affect other applications and users.
Category
This is the category where a service belongs.
Service
This is the name of the service.
Select the check box to have the NBG6616 apply this bandwidth management rule.
Click the Edit icon to open the Rule Configuration screen where you can modify the
rule.
rule.
User-defined
Service
Service
Use this table to allocate specific amounts of bandwidth to specific applications or services
you specify.
you specify.
#
This is the number of an individual bandwidth management rule.
Enable
Select this check box to have the NBG6616 apply this bandwidth management rule.
Direction
Select To LAN&WLAN to apply bandwidth management to traffic from WAN to LAN and
WLAN.
WLAN.
Select To WAN to apply bandwidth management to traffic from LAN/WLAN to WAN.
Service Name
Enter a descriptive name for the bandwidth management rule.
Category
This is the category where a service belongs.
Modify
Click the Edit icon to open the Rule Configuration screen. Modify an existing rule or
create a new rule in the Rule Configuration screen. See
create a new rule in the Rule Configuration screen. See
more information.
Click the Remove icon to delete a rule.
Apply
Click Apply to save your customized settings.
Cancel
Click Cancel to begin configuring this screen afresh.