ZyXEL Communications Corporation NBG6616 Manual De Usuario
Chapter 22 Remote Management
NBG6616 User’s Guide
157
Use this screen to remotely turn on a device on the network. Click the Management > Remote
MGMT > Wake On LAN to open the following screen.
MGMT > Wake On LAN to open the following screen.
Figure 102
Management > Remote MGMT > Wake On LAN
The following table describes the labels in this screen.
Table 71
Management > Remote MGMT > Wake On LAN
LABEL
DESCRIPTION
Wake On LAN over WAN
Settings
Settings
Enable WOL over WAN
Select this option to have the NBG6616 forward a WoL “Magic Packet” to all
devices on the LAN if the packet comes from the WAN or remote network and
uses the port number specified in the Port field. A LAN device whose hardware
supports Wake on LAN then will be powered on if it is turned off previously.
devices on the LAN if the packet comes from the WAN or remote network and
uses the port number specified in the Port field. A LAN device whose hardware
supports Wake on LAN then will be powered on if it is turned off previously.
Port
Type a port number from which a WoL packet is forwarded to the LAN.
Wake On LAN
Wake MAC Address
Enter the MAC Address of the device on the network that will be turned on.
A MAC address consists of six hexadecimal character pairs.
Start
Click this to have the NBG6616 generate a WoL packet and forward it to turn
the specified device on.
the specified device on.
A screen pops up displaying MAC address error if you input the MAC address
incorrectly.
incorrectly.
Apply
Click Apply to save the setting to the NBG6616.
Cancel
Click Cancel to begin configuring this screen afresh.