ZyXEL Communications Corporation NBG6616 Manual De Usuario

 Chapter 25 Maintenance

NBG6616 User’s Guide

Find firmware at 

www.zyxel.com

 in a file that uses the version number and project code with a 

“*.bin” extension, e.g., “V1.00(AARO.0).bin”. The upload process uses HTTP (Hypertext Transfer 
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.

New Date 

(yyyy/mm/dd)

This field displays the last updated date from the time server or the last date configured 
manually.

When you select Manual, enter the new date in this field and then click Apply.

Get from Time 
Server

Select this radio button to have the NBG6616 get the time and date from the time 
server you specified below.

User Defined Time 
Server Address 

Select User Defined Time Server Address and enter the IP address or URL (up to 20 
extended ASCII characters in length) of your time server. Check with your ISP/network 
administrator if you are unsure of this information.

Time Zone Setup

Time Zone

Choose the time zone of your location. This will set the time difference between your 
time zone and Greenwich Mean Time (GMT). 

Daylight Savings

Daylight saving is a period from late spring to early fall when many countries set their 
clocks ahead of normal local time by one hour to give more daytime light in the 
evening.

Select this option if you use Daylight Saving Time.

Start Date

Configure the day and time when Daylight Saving Time starts if you selected Daylight 
Savings. The at field uses the 24 hour format. Here are a couple of examples:

Daylight Saving Time starts in most parts of the United States on the second Sunday of 
March. Each time zone in the United States starts using Daylight Saving Time at 2 A.M. 
local time. So in the United States you would select Second, Sunday, March and 
select 2 in the at field.

Daylight Saving Time starts in the European Union on the last Sunday of March. All of 
the time zones in the European Union start using Daylight Saving Time at the same 
moment (1 A.M. GMT or UTC). So in the European Union you would select Last, 
Sunday, March. The time you select in the at field depends on your time zone. In 
Germany for instance, you would select 2 because Germany's time zone is one hour 
ahead of GMT or UTC (GMT+1). 

End Date

Configure the day and time when Daylight Saving Time ends if you selected Daylight 
Savings. The at field uses the 24 hour format. Here are a couple of examples:

Daylight Saving Time ends in the United States on the first Sunday of November. Each 
time zone in the United States stops using Daylight Saving Time at 2 A.M. local time. 
So in the United States you would select First, Sunday, November and select 2 in the 
at field.

Daylight Saving Time ends in the European Union on the last Sunday of October. All of 
the time zones in the European Union stop using Daylight Saving Time at the same 
moment (1 A.M. GMT or UTC). So in the European Union you would select Last, 
Sunday, October. The time you select in the at field depends on your time zone. In 
Germany for instance, you would select 2 because Germany's time zone is one hour 
ahead of GMT or UTC (GMT+1). 

Apply

Click Apply to save your changes back to the NBG6616.

Cancel

Click Cancel to begin configuring this screen afresh.

Maintenance > Time (continued)