ZyXEL Communications Corporation NBG6616 Manual De Usuario
Chapter 5 Easy Mode
NBG6616 User’s Guide
39
Note: You can enable the wireless function of your NBG6616 by first turning on the switch
in the back panel.
Figure 26
Wireless Security
The following table describes the general wireless LAN labels in this screen.
5.6.7 WPS
Use this screen to add a wireless station to the network using WPS. Click WPS in the Wireless
Security to open the following screen.
Security to open the following screen.
Table 15
Wireless Security
LABEL
DESCRIPTION
Wireless Radio
Choose whether you want to apply the wireless security to 2.4G Hz or 5G Hz wireless
radio.
radio.
Wireless
Network Name
(SSID)
Network Name
(SSID)
(Service Set IDentity) The SSID identifies the Service Set with which a wireless station is
associated. Wireless stations associating to the access point (AP) must have the same
SSID. Enter a descriptive name (up to 32 keyboard characters) for the wireless LAN.
associated. Wireless stations associating to the access point (AP) must have the same
SSID. Enter a descriptive name (up to 32 keyboard characters) for the wireless LAN.
Security mode
Select WPA2-PSK to add security on this wireless network. The wireless clients which
want to associate to this network must have same wireless security settings as this device.
After you select to use a security, additional options appears in this screen.
want to associate to this network must have same wireless security settings as this device.
After you select to use a security, additional options appears in this screen.
Select No Security to allow any client to connect to this network without authentication.
Wireless
password
password
This field appears when you choose wither WPA2-PSK as the security mode.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Verify password
Type the password again to confirm.
Apply
Click Apply to save your changes back to the NBG6616.
Cancel
Click Cancel to close this screen.
WPS
Click this to configure the WPS screen.
You can transfer the wireless settings configured here (Wireless Security screen) to
another wireless device that supports WPS.
another wireless device that supports WPS.