ZyXEL Communications Corporation NBG6616 Manual De Usuario

Chapter 7 Access Point Mode

NBG6616 User’s Guide

Network > LAN > IP   

The table below describes the labels in the screen.

Network > LAN > IP

Obtain an IP Address 
Automatically

When you enable this, the NBG6616 gets its IP address from the network’s DHCP 
server (for example, your ISP). Users connected to the NBG6616 can now access 
the network (i.e., the Internet if the IP address is given by the ISP).

The Web Configurator may no longer be accessible unless you know the IP address 
assigned by the DHCP server to the NBG6616. You need to reset the NBG6616 to 
be able to access the Web Configurator again (see 

details on how to reset the NBG6616).

Also when you select this, you cannot enter an IP address for your NBG6616 in the 
field below.

Static IP Address

Click this if you want to specify the IP address of your NBG6616. Or if your ISP or 
network administrator gave you a static IP address to access the network or the 
Internet.

IP Address

Type the IP address in dotted decimal notation. The default setting is 192.168.1.2. 
If you change the IP address you will have to log in again with the new IP address.   

Subnet Mask

The subnet mask specifies the network number portion of an IP address. Your 
NBG6616 will automatically calculate the subnet mask based on the IP address that 
you assign. Unless you are implementing subnetting, use the subnet mask 
computed by the NBG6616.

Gateway IP Address

Enter a Gateway IP Address (if your ISP or network administrator gave you one) 
in this field.

DNS Assignment