ZyXEL Communications Corporation NWA1121NI Manual De Usuario
Chapter 1 Introducing the NWA1121-NI
NWA1121-NI User’s Guide
15
between associated wireless clients and the wired LAN.
Clients A, B and C access the AP and the
wired network behind the AP throught repeaters Z and Y.
Figure 4
Repeater Application
When the NWA1121-NI is in Repeater mode,
universal repeater
security between the NWA1121-NI
and other repeater
is independent of the security
between the wireless clients and the AP
or
repeater
. If you do not enable
universal repeater
security, traffic between APs is not encrypted.
When
universal repeater
security is enabled,
both APs and repeaters
must use the same pre-shared
key. See
for more details.
Once the security settings of peer sides match one another, the connection between devices is
made.
made.
At the time of writing,
universal repeater
security is compatible with the NWA1121-NI only.
1.3 Ways to Manage the NWA1121-NI
Use any of the following methods to manage the NWA1121-NI.
• Web Configurator. This is recommended for everyday management of the NWA1121-NI using a
(supported) web browser.
•
Command Line Interface. Line commands are mostly used for troubleshooting by service
engineers.
engineers.
• FTP (File Transfer Protocol) for firmware upgrades.
• SNMP (Simple Network Management Protocol). The device can be monitored by an SNMP
• SNMP (Simple Network Management Protocol). The device can be monitored by an SNMP
manager.