ZyXEL Communications Corporation OX253P Manual De Usuario
Chapter 14 QoS
OX253P User’s Guide
148
Filter Configuration
Use this section to define traffic to which this class will apply. The logical relationship of
the following parameters is “AND”. Select Exclude next to a parameter to not apply the
class to the traffic matching the criteria.
Source
the following parameters is “AND”. Select Exclude next to a parameter to not apply the
class to the traffic matching the criteria.
Source
Address
Subnet Mask
Enter a source IP address and the subnet mask for the criteria.
Port Range
Enter a port range on the source host for the criteria.
Destination
Address
Subnet Mask
Enter a destination IP address and the subnet mask for the criteria.
Port Range
Enter a port range on the destination host for the criteria.
Others
Service
Select the traffic type of a service (SIP, FTP or H.323) to which this
class will apply.
class will apply.
Protocol
Select TCP or UDP to specifiy the traffic type to which the class will
apply. You can also select User Defined and enter the number of a
protocol.
apply. You can also select User Defined and enter the number of a
protocol.
Apply
Click this button to save your changes back to the OX253P.
Cancel
Click this button to begin configuring this screen afresh.
Table 60 Create New Class (continued)
LABEL
DESCRIPTION