ZyXEL Communications Corporation OX253P Manual De Usuario
Chapter 4 Tutorials
OX253P User’s Guide
37
6
Next, go to the ADVANCED > NAT Configuration > General screen and select
the Enable Network Address Translation option.
the Enable Network Address Translation option.
7
Click Apply to save your settings.
8
Connect your computers to the OX253P’s Ethernet ports and you’re all set!
Note: You may need to configure the computers on your LAN to automatically obtain
IP addresses. For information on how to do this, see
Appendix B on page 189
.
4.2.1 Connecting Your Small Network to the Internet
Once your network is configured and hooked up, you will want to connect it to the
Internet next. To do this, just run the Internet Connection Wizard (
Internet next. To do this, just run the Internet Connection Wizard (
Chapter 3
on page 29
), which walks you through the process.
4.2.2 Changing Service Providers
This tutorial shows you how to import a new security certificate, which allows your
device to communicate with the company’s network servers. This is necessary if
you ever change Internet Service Providers and your OX253P is still compatible
with the new network. (In some cases it may not be.)
device to communicate with the company’s network servers. This is necessary if
you ever change Internet Service Providers and your OX253P is still compatible
with the new network. (In some cases it may not be.)
Goal: Import a new security certificate into the OX253P.
See Also:
Chapter 10 on page 97
.