ZyXEL Communications Corporation OX253P Manual De Usuario
Chapter 6 The LAN Configuration Screens
OX253P User’s Guide
58
6.4.1 IP Static Route Setup
Click an Edit icon in ADVANCED > LAN Configuration > IP Static Route to
edit a static route in the OX253P.
edit a static route in the OX253P.
Figure 15 Advanced> LAN Configuration > IP Static Route Setup > Edit
The following table describes the labels in this screen.
Active
This field shows whether this static route is active (Yes) or not (No).
Destination
This field displays the destination IP address(es) that this static route
affects.
Gateway
This field displays the IP address of the gateway to which the OX253P
should send packets for the specified Destination. The gateway is a
router or a switch on the same network segment as the device's LAN or
WAN port. The gateway helps forward packets to their destinations.
should send packets for the specified Destination. The gateway is a
router or a switch on the same network segment as the device's LAN or
WAN port. The gateway helps forward packets to their destinations.
Action
Click the Edit icon to modify this item.
Click the Delete icon to remove this item.
Table 15 Advanced> LAN Configuration > IP Static Route (continued)
LABEL
DESCRIPTION
Table 16 Advanced> LAN Configuration > IP Static Route Setup > Edit
LABEL
DESCRIPTION
Route Name
Enter the name of the static route.
Active
Select this if you want the static route to be used. Clear this if you do
not want the static route to be used.
not want the static route to be used.
Private
Select this if you do not want the OX253P to tell other routers about this
static route. For example, you might select this if the static route is in
your LAN. Clear this if you want the OX253P to tell other routers about
static route. For example, you might select this if the static route is in
your LAN. Clear this if you want the OX253P to tell other routers about
this static route.
Destination IP
Address
Address
Enter one of the destination IP addresses that this static route affects.