ZyXEL Communications Corporation OX253P Manual De Usuario
Chapter 7 The WAN Configuration Screens
OX253P User’s Guide
75
The following table describes the labels in this screen.
7.5 Advanced
Click ADVANCED > WAN Configuration > Advanced to configure your DNS
server, RIP, Multicast and Windows Networking settings.
server, RIP, Multicast and Windows Networking settings.
Figure 25 ADVANCED > WAN Configuration > Advanced
Table 22 ADVANCED > WAN Configuration > Buzzer
LABEL
DESCRIPTION
Enable Buzzer
Select this to turn on the buzzer in the outdoor unit (ODU). You may
need to turn on the buzzer when you set up the ODU. The buzzer sounds
the number of beeps based on the signal strength (the RSSI value)
received from the base station.
need to turn on the buzzer when you set up the ODU. The buzzer sounds
the number of beeps based on the signal strength (the RSSI value)
received from the base station.
• RSSI > -50: The five LEDs on the ODU light on and the buzzer sounds
five beeps regularly.
• -50 > RSSI > -60: Four of the five LEDs on the ODU light on and the
buzzer sounds four beeps regularly.
• -60 > RSSI > -70: Three of the five LEDs on the ODU light on and the
buzzer sounds three beeps regularly.
• -70 > RSSI > -80: Two of the five LEDs on the ODU light on and the
buzzer sounds two beeps regularly.
• -80 > RSSI > -90: One of the five LEDs on the ODU lights on and the
buzzer sounds one beep regularly.
• -90 > RSSI - The buzzer does not sound.
Disable Buzzer Select this to turn the buzzer off.
Apply
Apply
Click to save your changes.
Reset
Click to restore your previously saved settings.